PR3030 Solar charge controller

Solar change controller/Solar change/Solar street lamps controller/solar controller

The PR 10-30 series of charge controllers is the highlight in the range.

The latest charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user.

Product features

Hybrid controller

State of charge determination with Steca AtonIC (SOC)Automatic detection of voltagePWM controlMultistage charging technologyLoad disconnection depending on SOCAutomatic load reconnectionTemperature compensationCommon positive grounding or negative grounding on one terminalIntegrated data logger

Night light functionIntegrated self testMonthly maintenance charge

Electronic protection functionsOvercharge protectionDeep discharge protectionReverse polarity protection of load, module and batteryAutomatic electronic fuseShort circuit protection of load and moduleOvervoltage protection at module inputOpen circuit protection without batteryReverse current protection at nightOvertemperature and overload protectionBattery overvoltage shutdown

DisplaysGraphical LCD display- for operating parameters, fault messages, self testOperationSimple menu-driven operationProgramming by buttonsManual load switch

OptionsPrepayment interfaceExternal temperature sensorAlarm contact

Certificates

Approved by the World Bank for Nepal

Compliant with European Standards (CE)

ROHS compliant

Made in china

	PR 1010	PR1515	PR2020	PR3030
Characterisation  of the operating performance
System voltage	12V(24V)
Own consumption	12mA
DC input side
Open circuit voltage solar module	‹47V
Module current	10A	15A	20A		30A
DC output side
Load current	10A	15A	20A			30A
End of charge voltage	liquid 13.9V(27.8V) gel 14.1V(28.2V)
Boost charge voltage	14.4V(28.8V)
Equalisation charge	14.7v(29.4v)
Reconnection voltage(SOC/LVR)	›50%/12.6V(25.2V)
Deep discharge protection(SOC/LVD)	‹30%/11.1V(22.2V)
Operating conditions
Ambient temperature	-10 ºC…+50 ºC
Fitting and construction
Terminal(fine/single wire)	16m m²/25m m²-AWG6/4
Degree of protection	IP 32
Dimension(X x Y x Z)	187X95X44mm
Weight	350g

PR3030 Solar charge controller